dmesg - Intel Xeon E5-1660 0

Return To Intel Xeon E5-1660 0 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-34-generic (buildd@allspice) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #60-Ubuntu SMP Wed Aug 13 15:45:27 UTC 2014 (Ubuntu 3.13.0-34.60-generic 3.13.11.4)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000099bff] usable
BIOS-e820: [mem 0x0000000000099c00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000018ebbfff] usable
BIOS-e820: [mem 0x0000000018ebc000-0x0000000018fe7fff] ACPI NVS
BIOS-e820: [mem 0x0000000018fe8000-0x0000000018fe8fff] usable
BIOS-e820: [mem 0x0000000018fe9000-0x0000000018ffffff] ACPI NVS
BIOS-e820: [mem 0x0000000019000000-0x000000001dffcfff] usable
BIOS-e820: [mem 0x000000001dffd000-0x000000001dffffff] ACPI data
BIOS-e820: [mem 0x000000001e000000-0x00000000aa777fff] usable
BIOS-e820: [mem 0x00000000aa778000-0x00000000ac80ffff] reserved
BIOS-e820: [mem 0x00000000ac810000-0x00000000ad7fffff] usable
BIOS-e820: [mem 0x00000000b0000000-0x00000000b3ffffff] reserved
BIOS-e820: [mem 0x00000000fed20000-0x00000000fed3ffff] reserved
BIOS-e820: [mem 0x00000000fed50000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffa3ffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000084fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Dell Inc. Precision T3600/0PTTT9, BIOS A13 05/11/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x850000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask 3FF800000000 write-back
  1 base 000800000000 mask 3FFFC0000000 write-back
  2 base 000840000000 mask 3FFFF0000000 write-back
  3 base 0000AE000000 mask 3FFFFE000000 uncachable
  4 base 0000B0000000 mask 3FFFF0000000 uncachable
  5 base 0000C0000000 mask 3FFFC0000000 uncachable
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 32GB, type WB
reg 1, base: 32GB, range: 1GB, type WB
reg 2, base: 33GB, range: 256MB, type WB
reg 3, base: 2784MB, range: 32MB, type UC
reg 4, base: 2816MB, range: 256MB, type UC
reg 5, base: 3GB, range: 1GB, type UC
total RAM covered: 32736M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 64M 	num_reg: 9  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2560MB, range: 256MB, type WB
reg 3, base: 2784MB, range: 32MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 8GB, type WB
reg 6, base: 16GB, range: 16GB, type WB
reg 7, base: 32GB, range: 1GB, type WB
reg 8, base: 33GB, range: 256MB, type WB
e820: update [mem 0xae000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xad800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f1d60-0x000f1d6f] mapped at [ffff8800000f1d60]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000093000] 93000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdf000, 0x01fdffff] PGTABLE
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0x84fe00000-0x84fffffff]
 [mem 0x84fe00000-0x84fffffff] page 2M
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0x84c000000-0x84fdfffff]
 [mem 0x84c000000-0x84fdfffff] page 2M
init_memory_mapping: [mem 0x800000000-0x84bffffff]
 [mem 0x800000000-0x83fffffff] page 1G
 [mem 0x840000000-0x84bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x18ebbfff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x18dfffff] page 2M
 [mem 0x18e00000-0x18ebbfff] page 4k
init_memory_mapping: [mem 0x18fe8000-0x18fe8fff]
 [mem 0x18fe8000-0x18fe8fff] page 4k
init_memory_mapping: [mem 0x19000000-0x1dffcfff]
 [mem 0x19000000-0x1ddfffff] page 2M
 [mem 0x1de00000-0x1dffcfff] page 4k
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
init_memory_mapping: [mem 0x1e000000-0xaa777fff]
 [mem 0x1e000000-0x3fffffff] page 2M
 [mem 0x40000000-0x7fffffff] page 1G
 [mem 0x80000000-0xaa5fffff] page 2M
 [mem 0xaa600000-0xaa777fff] page 4k
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0xac810000-0xad7fffff]
 [mem 0xac810000-0xac9fffff] page 4k
 [mem 0xaca00000-0xad7fffff] page 2M
init_memory_mapping: [mem 0x100000000-0x7ffffffff]
 [mem 0x100000000-0x7ffffffff] page 1G
RAMDISK: [mem 0x35b64000-0x36da9fff]
ACPI: RSDP 00000000000fe300 000024 (v02 DELL  )
ACPI: XSDT 000000001dffee18 000074 (v01 DELL    CBX3    06222004 MSFT 00010013)
ACPI: FACP 0000000018ff0c18 0000F4 (v04 DELL    CBX3    06222004 MSFT 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20131115/tbfadt-395)
ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT - 0x18FFDF40/0x0000000018FF1F40, using 32 (20131115/tbfadt-522)
ACPI: DSDT 0000000018faa018 006373 (v01 DELL    CBX3    00000000 INTL 20091112)
ACPI: FACS 0000000018ffdf40 000040
ACPI: APIC 000000001dffdc18 000158 (v02 DELL    CBX3    06222004 MSFT 00010013)
ACPI: MCFG 0000000018ffed18 00003C (v01 A M I  OEMMCFG. 06222004 MSFT 00000097)
ACPI: TCPA 0000000018ffec98 000032 (v02                 00000000      00000000)
ACPI: SSDT 0000000018fefa98 000306 (v01 DELLTP      TPM 00003000 INTL 20091112)
ACPI: HPET 0000000018ffec18 000038 (v01 A M I   PCHHPET 06222004 AMI. 00000003)
ACPI: BOOT 0000000018ffeb98 000028 (v01 DELL   CBX3     06222004 AMI  00010013)
ACPI: SSDT 0000000018fb1018 036CE6 (v02  INTEL    CpuPm 00004000 INTL 20091112)
ACPI: SLIC 0000000018feec18 000176 (v03 DELL    CBX3    06222004 MSFT 00010013)
ACPI: DMAR 0000000018ff0f18 000094 (v01 A M I   OEMDMAR 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000084fffffff]
Initmem setup node 0 [mem 0x00000000-0x84fffffff]
  NODE_DATA [mem 0x84fff8000-0x84fffcfff]
 [ffffea0000000000-ffffea00213fffff] PMD -> [ffff88082f600000-ffff88084f5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x84fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x00098fff]
  node   0: [mem 0x00100000-0x18ebbfff]
  node   0: [mem 0x18fe8000-0x18fe8fff]
  node   0: [mem 0x19000000-0x1dffcfff]
  node   0: [mem 0x1e000000-0xaa777fff]
  node   0: [mem 0xac810000-0xad7fffff]
  node   0: [mem 0x100000000-0x84fffffff]
On node 0 totalpages: 8369594
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3992 pages, LIFO batch:0
  DMA32 zone: 10905 pages used for memmap
  DMA32 zone: 697890 pages, LIFO batch:31
  Normal zone: 119808 pages used for memmap
  Normal zone: 7667712 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x10] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x11] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x12] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x13] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x14] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x15] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x16] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x17] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x18] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x19] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x1a] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x1b] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x1c] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x1d] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x1e] disabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x1f] disabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec3f000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec3f000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 32 CPUs, 20 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x00099000-0x00099fff]
PM: Registered nosave memory: [mem 0x0009a000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x18ebc000-0x18fe7fff]
PM: Registered nosave memory: [mem 0x18fe9000-0x18ffffff]
PM: Registered nosave memory: [mem 0x1dffd000-0x1dffffff]
PM: Registered nosave memory: [mem 0xaa778000-0xac80ffff]
PM: Registered nosave memory: [mem 0xad800000-0xafffffff]
PM: Registered nosave memory: [mem 0xb0000000-0xb3ffffff]
PM: Registered nosave memory: [mem 0xb4000000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed4ffff]
PM: Registered nosave memory: [mem 0xfed50000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xff9fffff]
PM: Registered nosave memory: [mem 0xffa00000-0xffa3ffff]
PM: Registered nosave memory: [mem 0xffa40000-0xffffffff]
e820: [mem 0xb4000000-0xfed1ffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:32 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88082f200000 s86336 r8192 d24256 u131072
pcpu-alloc: s86336 r8192 d24256 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8238796
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32848956K/33478376K available (7363K kernel code, 1142K rwdata, 3400K rodata, 1336K init, 1440K bss, 629420K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=32.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-31.
NR_IRQS:16640 nr_irqs:1344 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3291.878 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6583.75 BogoMIPS (lpj=13167512)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 18 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28495 entries in 112 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000fbffe000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fbffe000 ver 1:0 cap d2078c106f0462 ecap f020fa
dmar: RMRR base: 0x000000ac7c4000 end: 0x000000ac7d3fff
dmar: RHSA base: 0x000000fbffe000 proximity domain: 0x0
IOAPIC id 0 under DRHD base  0xfbffe000 IOMMU 0
IOAPIC id 2 under DRHD base  0xfbffe000 IOMMU 0
HPET id 0 under DRHD base 0xfbffe000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-1660 0 @ 3.30GHz (fam: 06, model: 2d, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
x86: Booted up 1 node, 12 CPUs
smpboot: Total of 12 processors activated (79005.07 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x18ebc000-0x18fe7fff] (1228800 bytes)
PM: Registering ACPI NVS region [mem 0x18fe9000-0x18ffffff] (94208 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time:  8:44:33, date: 08/14/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xb0000000-0xb3ffffff] (base 0xb0000000)
PCI: MMCONFIG at [mem 0xb0000000-0xb3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
dmi type 0xB1 record - unknown flag
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-1f])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [AER PCIeCapability]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME]
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-1f]
pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfbffffff]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: [8086:3c03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb62d000-0xfb62dfff]
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb62c000-0xfb62c00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: [8086:1d3d] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io  0xf0a0-0xf0a7]
pci 0000:00:16.3: reg 0x14: [mem 0xfb62a000-0xfb62afff]
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfb600000-0xfb61ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfb629000-0xfb629fff]
pci 0000:00:19.0: reg 0x18: [io  0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb628000-0xfb6283ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfb620000-0xfb623fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1d16] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb627000-0xfb6273ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io  0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io  0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io  0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb626000-0xfb6267ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb625000-0xfb6250ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
pci 0000:01:00.0: [8086:1d74] type 01 class 0x060400
pci 0000:01:00.0: reg 0x10: [mem 0xfb200000-0xfb203fff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PCI bridge to [bus 01-03]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xfb100000-0xfb2fffff]
pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf08fffff 64bit pref]
pci 0000:02:08.0: [8086:1d3f] type 01 class 0x060400
pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PCI bridge to [bus 02-03]
pci 0000:01:00.0:   bridge window [io  0xe000-0xefff]
pci 0000:01:00.0:   bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:01:00.0:   bridge window [mem 0xf0000000-0xf08fffff 64bit pref]
pci 0000:02:08.0: PCI bridge to [bus 03]
pci 0000:02:08.0:   bridge window [io  0xe000-0xefff]
pci 0000:02:08.0:   bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:02:08.0:   bridge window [mem 0xf0000000-0xf08fffff 64bit pref]
pci 0000:04:00.0: [10de:0ffa] type 00 class 0x030000
pci 0000:04:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:04:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:04:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:04:00.0: reg 0x24: [io  0xd000-0xd07f]
pci 0000:04:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:04:00.1: [10de:0e1b] type 00 class 0x040300
pci 0000:04:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:00:01.1: PCI bridge to [bus 04]
pci 0000:00:01.1:   bridge window [io  0xd000-0xdfff]
pci 0000:00:01.1:   bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:01.1:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:05:00.0: [1002:683f] type 00 class 0x030000
pci 0000:05:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:05:00.0: reg 0x18: [mem 0xfb500000-0xfb53ffff 64bit]
pci 0000:05:00.0: reg 0x20: [io  0xc000-0xc0ff]
pci 0000:05:00.0: reg 0x30: [mem 0xfb540000-0xfb55ffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D1 D2 D3hot
pci 0000:05:00.1: [1002:aab0] type 00 class 0x040300
pci 0000:05:00.1: reg 0x10: [mem 0xfb560000-0xfb563fff 64bit]
pci 0000:05:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 05]
pci 0000:00:02.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:02.0:   bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:00:02.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:06:00.0: [1000:0073] type 00 class 0x010400
pci 0000:06:00.0: reg 0x10: [io  0xb000-0xb0ff]
pci 0000:06:00.0: reg 0x14: [mem 0xfb460000-0xfb463fff 64bit]
pci 0000:06:00.0: reg 0x1c: [mem 0xfb400000-0xfb43ffff 64bit]
pci 0000:06:00.0: reg 0x30: [mem 0xfb440000-0xfb45ffff pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 06]
pci 0000:00:03.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:03.0:   bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:08:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:08:00.0: reg 0x10: [mem 0xfb300000-0xfb301fff 64bit]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 08]
pci 0000:00:1c.2:   bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xb0000000-0xfbffffff] (subtractive decode)
pci 0000:06:00.0: Max Payload Size 128, but upstream 0000:00:03.0 set to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 20-ff])
acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:01: _OSC: platform does not support [AER PCIeCapability]
acpi PNP0A08:01: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:01: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:01: _OSC: platform willing to grant [PCIeHotplug PME]
acpi PNP0A08:01: _OSC failed (AE_SUPPORT); disabling ASPM
acpi PNP0A08:01: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:20
pci_bus 0000:20: root bus resource [bus 20-ff]
pci_bus 0000:20: root bus resource [io  0x03b0-0x03df]
pci_bus 0000:20: root bus resource [mem 0x000a0000-0x000bffff]
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
ACPI: \_SB_.PCI1: notify handler is installed
Found 2 acpi root devices
vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:05:00.0
vgaarb: bridge control possible 0000:04:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus 3f
PCI: root bus 3f: using default resources
PCI: Probing PCI hardware (bus 3f)
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [io  0x0000-0xffff]
pci_bus 0000:3f: root bus resource [mem 0x00000000-0x3fffffffffff]
pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
pci 0000:3f:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:3f:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:3f:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:3f:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:3f:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:3f:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:3f:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:3f:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:3f:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:3f:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:3f:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:3f:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:3f:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:3f:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:3f:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:3f:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:3f:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:3f:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:3f:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:3f:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:3f:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:3f:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:3f:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:3f:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:3f:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:3f:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:3f:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:3f:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:3f:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:3f:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:3f:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:3f:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:3f:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:3f:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:3f:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:3f:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:3f:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:3f:13.6: [8086:3c45] type 00 class 0x088000
pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00099c00-0x0009ffff]
e820: reserve RAM buffer [mem 0x18ebc000-0x1bffffff]
e820: reserve RAM buffer [mem 0x18fe9000-0x1bffffff]
e820: reserve RAM buffer [mem 0x1dffd000-0x1fffffff]
e820: reserve RAM buffer [mem 0xaa778000-0xabffffff]
e820: reserve RAM buffer [mem 0xad800000-0xafffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed45000-0xfedfffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io  0x0680-0x069f] has been reserved
system 00:05: [io  0x0800-0x080f] has been reserved
system 00:05: [io  0xffff] has been reserved
system 00:05: [io  0xffff] has been reserved
system 00:05: [io  0x0400-0x0453] could not be reserved
system 00:05: [io  0x0458-0x047f] has been reserved
system 00:05: [io  0x0500-0x057f] has been reserved
system 00:05: [io  0x164e-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:07: [io  0x0454-0x0457] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:02:08.0: PCI bridge to [bus 03]
pci 0000:02:08.0:   bridge window [io  0xe000-0xefff]
pci 0000:02:08.0:   bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:02:08.0:   bridge window [mem 0xf0000000-0xf08fffff 64bit pref]
pci 0000:01:00.0: PCI bridge to [bus 02-03]
pci 0000:01:00.0:   bridge window [io  0xe000-0xefff]
pci 0000:01:00.0:   bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:01:00.0:   bridge window [mem 0xf0000000-0xf08fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01-03]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xfb100000-0xfb2fffff]
pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf08fffff 64bit pref]
pci 0000:00:01.1: PCI bridge to [bus 04]
pci 0000:00:01.1:   bridge window [io  0xd000-0xdfff]
pci 0000:00:01.1:   bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:01.1:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 05]
pci 0000:00:02.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:02.0:   bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:00:02.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 06]
pci 0000:00:03.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:03.0:   bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:00:1c.2: PCI bridge to [bus 08]
pci 0000:00:1c.2:   bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:00:1e.0: PCI bridge to [bus 09]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xb0000000-0xfbffffff]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfb100000-0xfb2fffff]
pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf08fffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf08fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf08fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:04: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xfb500000-0xfb5fffff]
pci_bus 0000:05: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:06: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:06: resource 1 [mem 0xfb400000-0xfb4fffff]
pci_bus 0000:08: resource 1 [mem 0xfb300000-0xfb3fffff]
pci_bus 0000:09: resource 4 [io  0x0000-0x03af]
pci_bus 0000:09: resource 5 [io  0x03e0-0x0cf7]
pci_bus 0000:09: resource 6 [io  0x03b0-0x03df]
pci_bus 0000:09: resource 7 [io  0x0d00-0xffff]
pci_bus 0000:09: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:09: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:09: resource 10 [mem 0xb0000000-0xfbffffff]
pci_bus 0000:20: resource 4 [io  0x03b0-0x03df]
pci_bus 0000:20: resource 5 [mem 0x000a0000-0x000bffff]
pci_bus 0000:3f: resource 4 [io  0x0000-0xffff]
pci_bus 0000:3f: resource 5 [mem 0x00000000-0x3fffffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:04:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18712K (ffff880035b64000 - ffff880036daa000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xa6778000-0xaa778000] (64MB) mapped at [ffff8800a6778000-ffff8800aa777fff]
Simple Boot Flag at 0xf3 set to 0x1
microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU2 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU3 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU4 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU5 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU6 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU7 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU8 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU9 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU10 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU11 sig=0x206d7, pf=0x1, revision=0x710
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1408005872.528:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 32768
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
ioapic: probe of 0000:00:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90007600000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
0000:00:16.3: ttyS4 at I/O 0xf0a0 (irq = 17, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xfb628000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-34-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 17, io mem 0xfb627000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-34-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:08:00.0: irq 65 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 66 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 67 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 68 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 69 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 70 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 71 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 72 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-34-generic xhci_hcd
usb usb3: SerialNumber: 0000:08:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-34-generic xhci_hcd
usb usb4: SerialNumber: 0000:08:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Warning: Keylock active
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
Loaded X.509 cert 'Magrathea: Glacier signing key: 500bc5c87d4b115cf3c1504f7a92e233c6143d58'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
  Magic number: 10:594:725
block loop5: hash matches
pcieport 0000:01:00.0: hash matches
rtc_cmos 00:06: setting system clock to 2014-08-14 08:44:33 UTC (1408005873)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 816K (ffff880001734000 - ffff880001800000)
Freeing unused kernel memory: 696K (ffff880001b52000 - ffff880001c00000)
systemd-udevd[211]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
megasas: 06.700.06.00-rc1 Sat. Aug. 31 17:00:00 PDT 2013
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
megasas: 0x1000:0x0073:0x1028:0x1f78: bus 6:slot 0:func 0
megasas: FW now in Ready state
megaraid_sas 0000:06:00.0: irq 73 for MSI/MSI-X
megaraid_sas 0000:06:00.0: [scsi0]: FW supports MSIX vector,Online CPUs: ,Current MSIX 
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 74 for MSI/MSI-X
PTP clock support registered
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfb626000 port 0xfb626100 irq 74
ata2: SATA max UDMA/133 abar m2048@0xfb626000 port 0xfb626180 irq 74
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 75 for MSI/MSI-X
megasas_init_mfi: fw_support_ieee=67108864
megasas: INIT adapter done
megaraid_sas 0000:06:00.0: Controller type: iMR
scsi0 : LSI SAS based MegaRAID driver
scsi 0:0:0:0: Direct-Access     HITACHI  HUC106060CSS600  A360 PQ: 0 ANSI: 6
scsi 0:0:1:0: Direct-Access     HITACHI  HUC106060CSS600  A360 PQ: 0 ANSI: 6
scsi 0:0:4:0: Direct-Access     HITACHI  HUC106060CSS600  A360 PQ: 0 ANSI: 6
scsi 0:0:5:0: Direct-Access     HITACHI  HUC106060CSS600  A360 PQ: 0 ANSI: 6
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:0:0:0: [sda] 1172123568 512-byte logical blocks: (600 GB/558 GiB)
sd 0:0:4:0: Attached scsi generic sg2 type 0
sd 0:0:1:0: [sdb] 1172123568 512-byte logical blocks: (600 GB/558 GiB)
sd 0:0:4:0: [sdc] 1172123568 512-byte logical blocks: (600 GB/558 GiB)
sd 0:0:5:0: Attached scsi generic sg3 type 0
sd 0:0:5:0: [sdd] 1172123568 512-byte logical blocks: (600 GB/558 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: c3 00 10 08
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: c3 00 10 08
sd 0:0:4:0: [sdc] Write Protect is off
sd 0:0:4:0: [sdc] Mode Sense: c3 00 10 08
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 0:0:5:0: [sdd] Write Protect is off
sd 0:0:5:0: [sdd] Mode Sense: c3 00 10 08
sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 0:0:4:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 0:0:5:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA
Alternate GPT is invalid, using primary GPT.
 sda: sda1 sda9
Alternate GPT is invalid, using primary GPT.
 sdc: sdc1 sdc9
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:4:0: [sdc] Attached SCSI disk
Alternate GPT is invalid, using primary GPT.
 sdd: sdd1 sdd9
sd 0:0:5:0: [sdd] Attached SCSI disk
Alternate GPT is invalid, using primary GPT.
 sdb: sdb1 sdb9
sd 0:0:1:0: [sdb] Attached SCSI disk
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 18:03:73:40:9a:92
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 7041FF-0FF
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: ATA-9: Samsung SSD 840 Series, DXT08B0Q, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      Samsung SSD 840  DXT0 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg4 type 0
sd 1:0:0:0: [sde] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 1:0:0:0: [sde] Write Protect is off
sd 1:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sde: sde1 sde2 sde3
ata2.00: ATAPI: TSSTcorp DVD-ROM SN-108BB, D200, max UDMA/100
sd 1:0:0:0: [sde] Attached SCSI disk
ata2.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM            TSSTcorp DVD-ROM SN-108BB D200 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg5 type 5
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
XFS (sde3): Mounting Filesystem
XFS (sde3): Ending clean mount
usb 2-1: new high-speed USB device number 2 using ehci-pci
random: init urandom read with 114 bits of entropy available
init: plymouth-upstart-bridge main process (346) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (355) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (359) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
spl: module verification failed: signature and/or  required key missing - tainting kernel
SPL: Loaded module v0.6.3-1~trusty
znvpair: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
ZFS: Loaded module v0.6.3-2~trusty, ZFS pool version 5000, ZFS filesystem version 5
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
random: nonblocking pool is initialized
tsc: Refined TSC clocksource calibration: 3292.067 MHz
SPL: using hostid 0x007f0101
Adding 7999484k swap on /dev/sde2.  Priority:-1 extents:1 across:7999484k SSFS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[758]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
AMD IOMMUv2 driver by Joerg Roedel 
AMD IOMMUv2 functionality not available on this system
mei_me 0000:00:16.0: irq 76 for MSI/MSI-X
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:3ca0
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:3ca8
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:3c71
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:3caa
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:3cab
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:3cac
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:3cad
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:3cb8
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.6 PCI ID 8086:3cf4
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0c.7 PCI ID 8086:3cf6
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC sbridge: Seeking for: dev 0d.6 PCI ID 8086:3cf5
EDAC MC0: Giving out device to module sbridge_edac.c controller Sandy Bridge Socket#0: DEV 0000:3f:0e.0 (POLLED)
EDAC sbridge: Driver loaded.
type=1400 audit(1408005875.142:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=849 comm="apparmor_parser"
type=1400 audit(1408005875.142:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=849 comm="apparmor_parser"
type=1400 audit(1408005875.142:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=849 comm="apparmor_parser"
type=1400 audit(1408005875.142:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=849 comm="apparmor_parser"
type=1400 audit(1408005875.142:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=849 comm="apparmor_parser"
type=1400 audit(1408005875.142:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=849 comm="apparmor_parser"
[fglrx] Maximum main memory to use for locked dma buffers: 31443 MBytes.
[fglrx]   vendor: 1002 device: 683f count: 1
[fglrx] ioport: bar 4, base 0xc000, size: 0x100
pci 0000:05:00.0: enabling device (0000 -> 0003)
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 13.35.5 [Mar 12 2014] with 1 minors
snd_hda_intel 0000:00:1b.0: irq 77 for MSI/MSI-X
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
hda_codec: ALC269VB: SKU not ready 0x411111f0
autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
   speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
   hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
   mono: mono_out=0x0
   inputs:
     Rear Mic=0x19
     Front Mic=0x18
realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
realtek: Enable default setup for auto mode as fallback
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
hda_intel: Disabling MSI
hda-intel 0000:04:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:04:00.1: Disabling 64bit DMA
hda-intel 0000:04:00.1: Enable delay in RIRB handling
Switched to clocksource tsc
intel_rapl: domain dram energy ctr 0:0 not working, skip
init: failsafe main process (1141) killed by TERM signal
type=1400 audit(1408005875.490:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1223 comm="apparmor_parser"
type=1400 audit(1408005875.490:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1223 comm="apparmor_parser"
type=1400 audit(1408005875.490:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1223 comm="apparmor_parser"
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: cups main process (1228) killed by HUP signal
init: cups main process ended, respawning
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:04:00.1/sound/card1/input10
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:04:00.1/sound/card1/input9
hda-intel 0000:05:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:05:00.1: Using LPIB position fix
hda-intel 0000:05:00.1: Force to non-snoop mode
snd_hda_intel 0000:05:00.1: irq 78 for MSI/MSI-X
hda-intel 0000:05:00.1: Enable sync_write for stable communication
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card2/input16
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card2/input15
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card2/input14
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card2/input13
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card2/input12
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card2/input11
e1000e 0000:00:19.0: irq 75 for MSI/MSI-X
init: Failed to spawn whoopsie main process: unable to execute: No such file or directory
e1000e 0000:00:19.0: irq 75 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: udev-fallback-graphics main process (1539) terminated with status 1
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: plymouth-upstart-bridge main process ended, respawning
fglrx_pci 0000:05:00.0: irq 79 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1970
[fglrx] Firegl kernel thread PID: 1971
[fglrx] Firegl kernel thread PID: 1972
[fglrx] IRQ 79 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000 
[fglrx] Reserved FB block: Unshared offset:f878000, size:4000 
[fglrx] Reserved FB block: Unshared offset:f87c000, size:484000 
[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
audit_printk_skb: 144 callbacks suppressed
type=1400 audit(1408005905.563:59): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2055 comm="apparmor_parser"
type=1400 audit(1408005905.563:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2055 comm="apparmor_parser"
type=1400 audit(1408005905.563:61): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2055 comm="apparmor_parser"
[drm] Initialized drm 1.1.0 20060810
vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:04:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  337.25  Tue May 27 11:05:28 PDT 2014
NVRM: API mismatch: the client has the version 331.38, but
NVRM: this kernel module has the version 337.25.  Please
NVRM: make sure that this kernel module and all NVIDIA driver
NVRM: components have the same version.
NVRM: nvidia_frontend_ioctl: minor 255, module->ioctl failed, error -22
nvidia 0000:04:00.0: irq 80 for MSI/MSI-X
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
nvidia_uvm: Loaded the UVM driver, major device number 247
nvidia 0000:04:00.0: irq 80 for MSI/MSI-X
nvidia 0000:04:00.0: irq 80 for MSI/MSI-X
nvidia 0000:04:00.0: irq 80 for MSI/MSI-X
perf samples too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: GPU at 0000:04:00: GPU-fe64e3cd-5bdd-b9d2-88c5-50b771478912
NVRM: Xid (0000:04:00): 13, 0001 00000000 0000a0c0 000002bc 00000003 00000000
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: Xid (0000:04:00): 13, 0001 00000000 0000a0c0 000002bc 00000003 00000000
perf samples too long (5024 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
CPU5: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU11: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU10: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU8: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU9: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU11: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU11: Core temperature/speed normal
CPU1: Package temperature/speed normal
CPU8: Package temperature/speed normal
CPU4: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU10: Package temperature/speed normal
CPU6: Package temperature/speed normal
CPU9: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU11: Package temperature/speed normal
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: os_pci_init_handle: invalid context!
NVRM: Xid (0000:04:00): 13, 0001 00000000 0000a0c0 000002bc 00000003 00000000
CPU5: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
crafty[13633]: segfault at 0 ip 00007f7b26366330 sp 00007fff29e9b4f8 error 4 in libc-2.19.so[7f7b262f4000+1bc000]
crafty[13637]: segfault at 0 ip 00007f042c42c330 sp 00007fff1b209da8 error 4 in libc-2.19.so[7f042c3ba000+1bc000]
crafty[13641]: segfault at 0 ip 00007fcef0a49330 sp 00007fff9d9e3438 error 4 in libc-2.19.so[7fcef09d7000+1bc000]

Return To Intel Xeon E5-1660 0 System Information